In this example windows XP is the operating system others may differ in appearance. You should now be able to communicate with the modules. Now plug the lead into your cars diagnostic socket and turn on the ignition, if you want you can click on the test button again, this time you should see the message port OK interface found. Now open your Vagcom/VCDS lite program click on options.Ĭheck the com port number is the same as the one in device manager then click test, you should then see the message port OK interface not found. If you have a number higher than 4 you can change it on this screen at the top, now look down at the latency timer the default setting is 16 you need to change this to 2 then click OK and close all other windows.
Druga rzecz - to kabel musi by podczony do zasilania 12V (do samochodu), eby przeszed test interfejsu w VCDS-Lite. When not connected to car get Port Status OK Interface Found Type Rosstech Hex-USB Status Not plugged into car but when connect to car get the port status ok interface not found. to sprawd czy kabel nadal dziaa i jest widoczny jako port COM, bo ostatnimi czasy sterowniki kabli FT232 z Windows Update 'zabiy' sporo klonw. Power up your laptop then plug your lead into the USB socket of your laptop.ĭouble click on COM port & LPT then double click USB serial port (COM4) On the properties box click the port settings tab now click advanced you should now be in advanced settings for COM4 In this example com4 is used yours may be any number from 1 to 4. Licence from Rosstech, 2 cars same laptop).
Are you having problems with Vagcom/VCDS lite connecting to your car, it may just need configuring correctly.
0 kommentar(er)
